Key Takeaways
- Earnings Before Interest and Taxes (EBIT) keeps depreciation and amortization as expenses, while Earnings Before Interest, Taxes, Depreciation, and Amortization (EBITDA) adds them back to earnings.
- EBIT equals net income plus income tax expense and net interest expense, while EBITDA equals EBIT plus depreciation and amortization.
- A $5 million heating, ventilation, and air conditioning (HVAC) or plumbing business with $140,000 of depreciation and amortization shows $560,000 of EBIT and $700,000 of EBITDA.
- Buyers multiply sustainable adjusted EBITDA by an EBITDA multiple to estimate enterprise value, while EBIT shows how much the accounting cost of trucks and equipment reduces earnings.
- Core Growth Group, an operator-buyer acquiring Texas HVAC and plumbing businesses, helps owners get their financials ready for buyer review.
Why EBIT and EBITDA Diverge for HVAC and Plumbing Businesses
EBIT leaves depreciation and amortization inside earnings while EBITDA adds them back, and that single difference pulls the two figures apart for HVAC and plumbing contractors. These companies carry real depreciation on service vehicles, diagnostic tools, and excavation equipment, so owners who swap the two numbers end up misreading their own valuation.
That add-back is not cash in the bank, and it says nothing about whether the trucks behind it are new or due for replacement, so buyers look past the headline figure before making an offer.
At Core Growth Group, our founder Clint runs his own service business and buys qualifying HVAC and plumbing companies across Texas directly, without a broker listing. As an operator-buyer, he looks at the condition of the fleet behind the depreciation figure, not the figure alone.
Core Growth Group: Skip the Broker. Sell Direct to a Strategic Buyer.
Operator-Led Acquisitions | Texas Triangle Focus
Built by an Operator, for Operators: Core Growth Group acquires HVAC and plumbing service businesses across Dallas-Fort Worth, Houston, Austin, and San Antonio. Founder Clint runs his own service business (Hill Country Plumber) and buys directly, so qualified sellers skip the listing process entirely and avoid the 89% of brokered businesses that never close.
Why Sellers Choose Core Growth Group:
- ✓Direct strategic buyer, not a broker or private equity firm
- ✓High-level consulting to prepare your business for maximum valuation
- ✓Grow, Prepare, or Exit framework tailored to your stage
- ✓Texas-based operator who understands service business realities
Your business deserves a buyer who gets it.
What Are the Key Differences Between EBITDA & EBIT?
Both EBIT and EBITDA are non-GAAP measures, meaning neither is defined under generally accepted accounting principles, though the operating income line on your income statement is often close to EBIT.
Both also exclude interest expense and income tax expense, which is why analysts often use them to compare earnings before financing and tax effects. Where they split is depreciation and amortization, and that split matters more for asset-heavy service businesses than it does for companies with few physical assets.

How They Treat Depreciation & Amortization
Depreciation allocates the cost of tangible assets, like service trucks and diagnostic equipment, over their useful lives. Amortization performs the same function for certain intangible assets. EBIT keeps these charges in the earnings calculation, which means it still reflects the accounting impact of an aging fleet. EBITDA adds them back, which can make two very different businesses look identical on paper.
Consider two HVAC contractors with the same EBITDA. One recently replaced its entire service fleet and has years before the next major capital outlay. The other is running trucks that are overdue for replacement and facing a wall of spending in the next 12 to 24 months.
EBITDA alone will not reveal that difference. It treats both companies as if their depreciation and amortization never happened. Adding depreciation and amortization back changes the number on paper; it does not remove the need to maintain or replace the trucks and equipment behind it.
Formulas Compared

How To Calculate EBITDA
EBITDA starts from net income and adds back four items: income tax expense, net interest expense, depreciation, and amortization. Net interest expense means interest expense minus interest income, which nets out financing activity. Written as a formula:
- EBITDA = Net income + Income tax expense + Net interest expense + Depreciation + Amortization
- Alternatively, EBITDA = EBIT + Depreciation + Amortization
Here is how that plays out for a hypothetical $5 million HVAC or plumbing company. Assume net income of $450,000, income tax expense of $50,000, net interest expense of $60,000, depreciation of $120,000, and amortization of $20,000. For pass-through entities such as S corporations, the tax line may be small; confirm your structure with a qualified CPA.
EBITDA comes to $450,000 + $50,000 + $60,000 + $120,000 + $20,000, which equals $700,000. Divide that by $5,000,000 in revenue and the EBITDA margin lands at 14%.
How To Calculate EBIT
EBIT uses the same starting point but stops one step earlier, leaving depreciation and amortization inside the number. The formula is:
- EBIT = Net income + Income tax expense + Net interest expense
Using the same example, EBIT equals $450,000 + $50,000 + $60,000, or $560,000. That puts the EBIT margin at 11.2%, nearly three points lower than the EBITDA margin on the identical business. The $140,000 gap between the two figures comes entirely from depreciation and amortization; nothing else changes between the two calculations.
That gap matters: it is not extra cash sitting in the bank, and it does not tell an owner how much the company needs to spend annually to keep trucks and equipment running. Depreciation and amortization are accounting allocations, while actual capital spending follows its own timing, often in large, irregular amounts rather than a steady $140,000 a year.
How Buyers Use EBITDA vs EBIT in a Valuation
How EBITDA Is Used
EBITDA helps buyers compare businesses before differences in financing structure, income taxes, and depreciation or amortization methods distort the picture. In acquisition analysis, buyers typically focus on adjusted EBITDA rather than the seller’s reported figure, correcting for owner compensation, personal expenses, and nonrecurring items to estimate sustainable earnings.
The common valuation shorthand is straightforward: indicative enterprise value equals sustainable adjusted EBITDA multiplied by an appropriate EBITDA multiple. A buyer will often open with this EBITDA-based figure, then move into fleet condition, replacement spending, and the reliability of the reported numbers before finalizing an offer.
Using the earlier example, if that $700,000 held up as adjusted EBITDA, the 2x to 4x range that businesses near $5 million in revenue typically trade at would point to an indicative enterprise value of roughly $1.4 million to $2.8 million. That is well below the $5 million revenue figure many owners anchor to, and where a business lands within the range depends on growth, owner reliance, and the quality of its records. Preparing a business for that review is typically a 12-month job, which is why owners who start early tend to defend a higher multiple.
How EBIT Is Used
EBIT keeps depreciation and amortization visible, making it useful for understanding how profitability changes once the accounting cost of assets is recognized. It is not a substitute for analyzing actual future capital expenditure, but it does show you how asset-heavy your operation really is before any add-backs are applied.
EBITDA vs EBIT: Comparison Table
| Factor | EBITDA | EBIT |
| Formula | Net income + Income tax + Net interest + D&A | Net income + Income tax + Net interest |
| Includes depreciation/amortization | No, added back | Yes, kept as an expense |
| Example result ($5M revenue company) | $700,000 | $560,000 |
| Example margin | 14% | 11.2% |
| Best used for | Comparing businesses, estimating enterprise value | Showing asset cost impact on earnings |
Prepare Your EBITDA for a Sale with Core Growth Group

EBIT shows what depreciation and amortization cost your business, while EBITDA sets the base most buyers multiply to reach enterprise value. Neither number measures cash, so your valuation is far easier to defend when you can trace net income to EBIT, EBITDA, and adjusted EBITDA, with a qualified accountant confirming how each add-back is recorded. Clean, traceable numbers are also one of the clearest ways to avoid becoming part of the 89% of listed businesses that never sell.
At Core Growth Group, our Prepare work gets HVAC and plumbing owners sale-ready by reviewing add-backs, financial records, and owner reliance, including AI tools that help review financials and flag inconsistencies before a buyer does. Clint also buys qualifying businesses in Dallas-Fort Worth, Houston, Austin, and San Antonio directly. Start a conversation with Core Growth Group to learn what your EBITDA and EBIT say about your company’s value.
Frequently Asked Questions (FAQs)
How can you convert EBIT to EBITDA?
Add depreciation and amortization back to EBIT: EBITDA = EBIT + Depreciation + Amortization. In the earlier example, $560,000 of EBIT plus $120,000 of depreciation and $20,000 of amortization produces $700,000 of EBITDA, a $140,000 difference driven entirely by those two line items.
Is EBITDA or EBIT the operating profit?
Neither term is automatically the same as operating profit. EBIT can equal operating income when a business has no other nonoperating gains or losses, but starting from net income and adding back interest and income taxes can still leave other nonoperating items inside the EBIT figure.
How can you calculate EBITDA vs EBIT?
EBIT equals net income plus income tax expense plus net interest expense. EBITDA takes that same result and adds depreciation and amortization on top, so EBITDA = Net income + Income tax expense + Net interest expense + Depreciation + Amortization.
Why use EBITDA instead of profit?
EBITDA strips out financing structure, income taxes, and depreciation or amortization methods, making it easier to compare businesses with different debt loads or asset histories. Net profit, by contrast, reflects every financing and accounting choice specific to that one company, which can obscure comparisons between similar businesses.
What does Core Growth Group do?
Core Growth Group is a direct strategic buyer of HVAC and plumbing service businesses across Dallas-Fort Worth, Houston, Austin, and San Antonio. Founder Clint runs his own service business, so qualified sellers can talk with him directly instead of going through a broker listing. Owners who aren’t ready to sell, or whose business falls outside what he buys, can work with us to prepare the company for a future sale.
*Disclaimer: This content is for informational purposes only and should not be considered business, financial, legal, or tax advice. Results vary based on market conditions and individual business circumstances. To learn more about scaling, preparing, or exiting your business, visit Core Growth Group.
Want to Know What Your Company Could Be Worth?
Answer a few quick questions so Clint can understand where your company is today and what next step may make the most sense.
Get Company Valuation
